ALARMAS Y MONITOREADO

6700 Vitals Vessel System Monitoring & Smart Alarm Device

6700-0200 SmartBus Hub
The SmartBus Hub Module allows the user to connector up to five (5) additional SmartBus sensors. Kobelt offers three (3) options for SmartBus temperature sensors that can be used in any configuration, depending on your needs. Kobelt offers a barrel style temperature sensor (VT100) for immersion in air or liquid, a ring-terminal sensor (VT130) for direct connection to a metal surface, and a high-temperature sensor (VT110) for high-temperature applications.

6700-0300 Analog Input Expansion Module
The Analog Input Expansion Module allows the user to connect up to six (6) additional analog sensors. The inputs are differential to reduce the probability of creating ground loops.

6700-0310 Digital Input Expansion Module
The Digital Input Expansion Module allows the user to connector up to twelve (12) additional digital inputs. The inputs are separated into three banks to allow inputs with different references.

6700-0320 SMS Communications Module
The SMS Communications Module connects to the Vitals System Monitoring Panel to provide support for broadcasting of system status over SMS messaging. Management and configuration of messages is handled directly through the Vitals System Monitoring Panel.

DESCARGA EL CATÁLOGO AQUÍ

6507 Mode Selector Panel

Durable bronze water tight panel for up to 6 buttons or switches.

The 6507 is a panel with integrated switches and indicators, used when the control station and mode selector are located in different areas. The 6507 is most often used with the 6506 Side Mount electronic control, is water tight and comes in either four or six selector button configurations.

DESCARGA EL CATÁLOGO AQUÍ

6510 Control Base

The 6510 is a solid, bronze and stainless steel base for mounting control heads onto, allowing for switches, indicator lights or other button-based functionality to be added to a stand-alone control head. The 6510 is available with either 4 or 6 switch configurations.

The 6510 is compatible with the 6515, 6523, 6545 and 6555 control heads. Photo shown is of a 6510 base with a 6555 control head mounted.

6511 Control Base

The 6511 control base is a solid, bronze and stainless steel base for mounting control heads onto, allowing for switches, indicator lights or other button-based functionality to be added to a stand-alone control head. The 6511 is available with a 6 switch configurations and has an alarm built into the base.

The 6511 is compatible with the 6515, 6523, 6545 and 6555 control heads. Photo shown is of a 6511 base with a 6555 control head mounted.

Kobelt also produces alarm panels with part number 6511, be sure to clarify that the control base is required along with a control head, rather than a basic alarm panel.

DESCARGA EL CATÁLOGO AQUÍ

6512 Control Base

The 6512 control base is a solid, bronze and stainless steel base for mounting control heads onto, allowing for switches, indicator lights or other button-based functionality to be added to a stand-alone control head. The 6512 also has an LED strip that allows for indicators on running position and a 4 line digital readout. The 6512 comes with a dimmer function, and is available with up to 12 switches.

The 6512 is compatible with the 6515, 6523, 6545 and 6555 control heads. Photo shown is of a 6512 base with a 6555 control head mounted.

DESCARGA EL CATÁLOGO AQUÍ

7175: Analog Indicators

The 7175 Analog Indicator gauges provide reliable display of rudder angle position, rudder order command, or propeller pitch at your vessel’s control stations.

These small, 3-inch diameter, waterproof gauges include backlight for night and daytime operations. They are available in a Master or Slave configuration to suit your system's requirements. A reversed rudder angle indicator is available to align with aft facing stations.

They can be configured with up to a total of six units in an operational loop.

The indicators are driven by a position transducer such as the Kobelt 7163, 7168, or 7174 Rudder Feedback Units (RFU).

DESCARGA EL CATÁLOGO AQUÍ

7180: Rudder Angle Indicator

The 7180 Rudder Angle Indicator is a smaller version of the popular Kobelt 7175 Rudder Angle Indicator. The 7180 is available in Master and Slave configurations in both 12VDC and 24VDC offerings. Both the Master and Slave contain a backlight to illuminate the indicator during dark operating hours.

The 7180 Rudder Angle Indicators will provide you with real-time visual display of the position of your rudder while your vessel is underway. Whether you are manoeuvring, or your autopilot is commanding your vessels, an accurate readout of your rudder position will be displayed on this tri-colour two-inch diameter display indicator.

The unit indicates the PORT direction of travel in Red and the STBD direction of travel in Green for easy and quick identification while steering. The system supports one Master Indicator with up to a maximum of 5 Slave Indicators (or “repeater stations”) commanded by a single input signal. The indicators are driven by a position transducer such as the Kobelt 7163, 7168, or 7174 Rudder Feedback Units (RFU).

DESCARGA EL CATÁLOGO AQUÍ

7178: Panoramic Rudder Angle Indicator

The 7178 is a large sized illuminated overhead rudder angle indicator typically installed in a high location in the wheelhouse to allow for viewing from almost all areas.

The 7178 is equipped with a manual dimmer, available in 12 VDC or 24 VDC versions with a 30,000 hour life cycle, and can be configured for easy centering of the pointers.

DESCARGA EL CATÁLOGO AQUÍ

6511-AP: Alarm Panels

The 6511-AP series of alarm panels are available in several configurations for monitoring of almost all functions. The 6511-AP series also has Starter Panels, capable remote start and stop panels for the wheelhouse or engine control room for single and multiple power packs.

The 6511-AP panels typically come in two primary configurations, single panel or dual panel, with an underside protected housing depth between 3" and 8" (7.6cm and 20.3cm). Standard features include Sonalert and a dimmer switch.

DESCARGA EL CATÁLOGO AQUÍ

6511-SP - Small Switch Panel

The 6511-SP series of small switch panels are primarily used for station selection, but can be used for any application that requires switching or indicators of this nature.

The 6511-SP series is available in water tight version, and allows for up to 6 switches or lamps. The photo shown is of a 6 switch panel.

6511-TP - Telegraph Panels

The 6511-TP series of telegraph panels allow for communication between the wheelhouse and the engine room. The 6511-TP panels are available in single and dual configurations, and can be integrated into any Kobelt electronic control system.

The photo shown is of a dual configuration model.

DESCARGA EL CATÁLOGO AQUÍ